2026 Jeep® Grand Cherokee L in Margate, FL

The 2026 Jeep® Grand Cherokee L combines a three-row cabin configuration, available four-wheel-drive systems, advanced suspension engineering, and multiple powertrain options within a full-size sport utility vehicle platform. The model features a steel uniframe construction with front-engine architecture and rear-wheel-drive or four-wheel-drive layouts. Jeep® designed the 2026 Jeep® Grand Cherokee L to support passenger capacity, towing capability, drivetrain efficiency, and controlled road handling across multiple trim configurations.

The 2026 Jeep® Grand Cherokee L measures 204.9 inches in overall length and rides on a 121.7-inch wheelbase. Body width measures 77.5 inches, while overall width at the mirrors reaches 84.6 inches. Standard suspension height measures 71.5 inches. The dimensions support a large passenger compartment with seating for up to seven occupants through a 2/3/2 seating layout. The second row includes either bucket seats or an available bench arrangement.

 

Pentastar® V-6 Performance Specifications

The standard engine for the 2026 Jeep® Grand Cherokee L is the 3.6-liter Pentastar® V-6. This engine uses a 60-degree V-type configuration with liquid cooling and sequential multiport electronic returnless fuel injection. The powertrain includes chain-driven dual overhead camshafts with 24 valves and hydraulic end-pivot roller rockers.

The 3.6-liter engine produces 293 horsepower at 6,400 rpm and 260 lb.-ft. of torque at 4,000 rpm. Compression ratio measures 11.3:1. Jeep® pairs the engine with an eight-speed TorqueFlite 8HP70 automatic transmission equipped with electronically modulated torque converter clutch control and driver-interactive manual shifting capability.

Gear ratios include a 4.71 first gear, 3.14 second gear, 2.10 third gear, 1.67 fourth gear, 1.29 fifth gear, 1.00 sixth gear, 0.84 seventh gear, and 0.67 eighth gear. Reverse ratio measures 3.30. The transmission configuration supports acceleration response, highway efficiency, and towing operation.

The Pentastar® V-6 uses regular 87-octane unleaded fuel. Oil capacity measures 5.0 quarts, while coolant capacity measures 14.0 quarts. The engine includes dual three-way catalytic converters, heated oxygen sensors, and internal engine emission-control features. Maximum engine speed reaches 6,700 rpm through an electronically limited calibration.

EPA fuel economy ratings reach 19 mpg city, 26 mpg highway, and 21 mpg combined for rear-wheel-drive models. Four-wheel-drive configurations produce ratings of 18 mpg city, 25 mpg highway, and 21 mpg combined.

Disclaimer: Manufacturer-estimated 19 city / 26 highway mpg with 3.6L V6 engine and eight-speed automatic transmission, 4x2. Manufacturer-estimated 18 city / 25 highway mpg with 3.6L V6 engine and eight-speed automatic transmission, 4x4. Actual mileage may vary. 

Hurricane Turbocharged Engine Architecture

The 2026 Jeep® Grand Cherokee L Laredo Altitude uses the 2.0-liter Hurricane Turbo 4 engine as standard equipment. This inline four-cylinder engine features turbocharging, liquid cooling, direct and port fuel injection, and dual overhead camshafts with 16 valves.

Engine construction includes a deep-skirt cast-aluminum block with cross-bolted steel main bearing caps, low-friction plasmaspray-bore-coated cylinders, a structural die-cast aluminum alloy oil pan, forged steel connecting rods, a forged steel crankshaft, and cast aluminum alloy pistons with DLC-coated piston pins.

The Hurricane Turbo 4 produces 324 horsepower at 6,000 rpm and 332 lb.-ft. of torque between 3,000 and 4,500 rpm. Compression ratio measures 12:1. Maximum engine speed reaches 6,500 rpm through electronic limitation.

Jeep® pairs the turbocharged engine with the TorqueFlite 880RE / 8HP80 eight-speed automatic transmission. The transmission uses a 5.50 first gear ratio, followed by 3.52, 2.20, 1.72, 1.30, 1.00, 0.83, and 0.64 ratios through eighth gear. Reverse ratio measures 4.54.

The Hurricane engine also uses regular 87-octane fuel. Oil capacity totals 5.0 quarts. Coolant capacity measures 10.4 quarts for the engine and 3.3 quarts for the intercooler system. The engine incorporates dual three-way catalytic converters and heated oxygen sensors for emissions control operation.

Four-Wheel-Drive Systems and Transfer Case Configurations

The 2026 Jeep® Grand Cherokee L offers two available electronically shifted transfer cases for four-wheel-drive applications. The MP 3010 transfer case uses a single-speed configuration with full-time active four-wheel-drive operation and variable front-to-rear torque split management.

The available MP 3022 transfer case uses a two-speed electronically shifted system. Operating modes include 4x4 Low, Neutral, and full-time active four-wheel drive. Low-range ratio measures 2.72. Torque distribution remains variable between the front and rear axles.

Front axle systems on four-wheel-drive models use a conventional differential with front axle disconnect functionality. Rear axle systems use conventional differentials across all engine configurations. Axle ratio measures 3.45:1.

These drivetrain systems support traction management on paved roads, loose surfaces, and uneven terrain conditions while maintaining standard driving operation during normal road use.

 

Suspension Engineering and Steering Calibration

The 2026 Jeep® Grand Cherokee L uses a multi-link independent front suspension system with coil springs, gas-charged twin-tube coil-over shock absorbers, and all-aluminum arms and knuckles. Rear suspension systems use multi-link architecture with coil springs, twin-tube shocks, load-leveling capability for towing operation, and all-aluminum suspension components.

Electric rack-and-pinion steering comes standard. Steering ratio measures 16.9:1 on rear-wheel-drive models and 15.6:1 on four-wheel-drive models. Steering turns lock-to-lock measure 2.9 on rear-wheel-drive configurations and 3.0 on four-wheel-drive versions. Turning diameter measures 39.6 feet curb-to-curb.

The chassis configuration supports controlled steering input, towing stability, and suspension articulation during varying road conditions.

Brake System Components and Electronic Stability Technology

The 2026 Jeep® Grand Cherokee L uses an electric boost braking system as standard equipment. Front brakes use 13.94-inch vented disc rotors with two-piston pin-slider calipers. Rear brakes use 13.78-inch vented disc rotors with single-piston pin-slider electronic parking brake calipers.

The brake system includes four-wheel antilock braking capability, electronic stability control, all-speed traction control, and brake assist functionality. These systems work together to support directional stability, wheel-slip reduction, and braking consistency during emergency maneuvers or low-traction conditions.

Parking brake operation uses a drum-in-hat configuration integrated into the rear braking system.

Interior Dimensions and Passenger Capacity

The 2026 Jeep® Grand Cherokee L provides 159.1 cubic feet of total passenger volume. Front-row headroom measures 39.8 inches, while front-row legroom measures 41.3 inches. Shoulder room totals 59.2 inches and hip room measures 57.4 inches.

Second-row passengers receive 39.9 inches of headroom and 39.4 inches of legroom. Knee clearance measures 4.6 inches. Shoulder room totals 58.0 inches, while hip room measures 56.3 inches. Second-row seat travel reaches 7.1 inches.

Third-row seating provides 37.3 inches of headroom and 30.3 inches of legroom. Shoulder room measures 51.9 inches and hip room measures 42.9 inches.

Cargo volume behind the third-row seats totals 17.2 cubic feet. Folding the third row expands cargo capacity to 46.9 cubic feet behind the second row. Maximum cargo volume behind the first row measures 84.6 cubic feet.

Fuel tank capacity totals 23 gallons.

Ground Clearance and Exterior Geometry Measurements

Standard suspension configurations provide 8.5 inches of ground clearance with P265/50R20 tires and the 3.6-liter engine. Available air suspension systems increase ground clearance to 10.9 inches in Position 2.

Approach angle measures 20.6 degrees with standard suspension systems and increases to 28.2 degrees with air suspension on Summit models in Position 2. Ramp breakover angle measures 18.2 degrees with standard suspension and 22.6 degrees with air suspension. Departure angle improves from 21.5 degrees to 23.6 degrees with the air suspension system.

Load floor height measures 32.2 inches with standard suspension and 30.2 inches with air suspension entry and exit mode activated. Sill step height decreases from 20.2 inches to 18.4 inches through the adjustable air suspension configuration.

These measurements support passenger accessibility, chassis clearance, and underbody protection during varying driving conditions.

Wheel Designs and Tire Configurations

Wheel specifications vary by trim level. Laredo and Limited trims use 18 x 8-inch painted cast-aluminum wheels as standard equipment. Altitude models use 20 x 8.5-inch Gloss Black-painted cast-aluminum wheels.

Summit trims use 20 x 8.5-inch low-gloss Silver Lithos cast-aluminum wheels. High Altitude and Summit Reserve trims use 21 x 9-inch wheel configurations with black-painted or machined finishes.

Standard tire sizing for Laredo and Limited trims measures 265/60R18. Available 20-inch wheel packages use 265/50R20 all-season tires. Summit models use Pirelli Scorpion Verde all-season tires.

Towing Capability and Weight Distribution

The 2026 Jeep® Grand Cherokee L supports a maximum trailer weight of 6,200 pounds with the 3.6-liter V-6 engine and 3.45 axle ratio. Payload ratings reach up to 1,400 pounds on Limited models.

Gross Vehicle Weight Ratings range from 6,500 pounds to 6,700 pounds depending on trim and drivetrain configuration. Estimated curb weights range from 4,524 pounds on the rear-wheel-drive Laredo to 5,068 pounds on the four-wheel-drive Summit.

Weight distribution remains balanced across the lineup. Rear-wheel-drive Laredo, Limited, and Summit trims use a 50/50 front-to-rear distribution. Four-wheel-drive models range from 52/48 to 50/50 distributions depending on trim configuration.

Visit Arrigo Chrysler Dodge Jeep Ram for a Test Ride

Drivers interested in detailed engineering specifications, towing capability, passenger dimensions, and drivetrain technology can examine the 2026 Jeep® Grand Cherokee L at Arrigo Chrysler Dodge Jeep® Ram in Margate, FL. A test drive allows direct evaluation of the eight-speed automatic transmission behavior, suspension calibration, steering response, and available four-wheel-drive operation. Interior seating flexibility, cargo measurements, and third-row passenger accommodations can also be reviewed during an in-person inspection. The available Hurricane Turbo 4 and standard Pentastar® V-6 engines provide distinct performance characteristics that can be compared through on-road driving evaluation. Scheduling a test drive also provides an opportunity to examine the braking systems, wheel configurations, and chassis engineering of the 2026 Jeep® Grand Cherokee L under standard driving conditions.